Zhuohang Precision Machining Factory

How Much Does Swiss Machining Cost

CNC turning center producing precision turned components at Zhuohang.

How Much Does Swiss Machining Cost — precision CNC machining from a Dongguan, China plant. Tolerances: ±0.002 mm turning, ±0.003 mm milling — ISO 9001 / IATF 16949 verified.

A direct answer to How Much Does Swiss Machining Cost — written for you deciding whether this process fits the part,.

Bottom line
  • a floor of 100-plus machines including 20+ 5-axis centres; 100+ staff, 80%+ skilled technicians.
  • Exports to Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa — based in China, serving customers worldwide.
  • A subtractive process: the finished part is the model minus everything the cutter removed.
  • Cost is decided at the manufacturability review, before the first chip.
  • No minimum order, prototype and production run on the same machines.

How does the work actually move through the shop?

The sequence is quoting and manufacturability review, programming and offline verification, fixturing, roughing, finishing, inspection, and first-article reporting. Each stage has a way to fail, and the expensive ones are the first and the last.

Cutting is usually the shortest part of the calendar time. Queue position, fixture design, and inspection documentation account for most of the lead, which is why asking for the first-article date and the repeat date separately gives a truer picture than a single lead-time number.

Which entity is responsible for the work?

Dongguan Zhuohang Ltd, registration 91441900MA4UWT6X39, established 2005.

Swiss Machining, the short answer

Swiss machining is a subtractive process: a rotating cutter removes material from a solid block or bar under numerical control, following a toolpath generated from a 3D model. The part that comes off the machine is the model, minus everything the cutter removed.

The distinction that matters commercially is between having the capability and having the depth. A plant with one machine in a family can make the part; a plant with twenty can make it on the week you need it, and re-route it when something breaks.

How does the process actually run, step by step?

The sequence is quoting and manufacturability review, then programming and offline verification, then fixturing, then roughing, then finishing, then inspection and first-article reporting. Each stage has a way to fail, and the expensive ones are the first and the last.

The manufacturability review is where cost is actually decided. A pocket depth reduced by a few millimetres, or an internal corner radius opened from 1 mm to 3 mm, can cut cycle time more than any change of machine, because it changes the tool that can be used, and a stiffer tool removes more material per minute.

The cost structure of swiss machining

Cost is driven by setup time amortised over quantity, cycle time, material and tooling, inspection labour, and the risk premium on the tolerance. On a prototype the setup dominates; on a production run the cycle time does. That is why a per-part price without a quantity is not a price.

The driver buyers most often underestimate is inspection. A drawing that calls out twenty dimensions has a different inspection cost from one that calls out five, and someone has to actually write the first-article report.

What actually goes wrong, and how is it prevented?

The failures that cost money are not crashes. They are the quiet ones: a tolerance held on the machine but lost in a later operation, a revision built from a superseded drawing, and a surface finish callout that meant something different in another standard.

Each has a cheap control. Datum structure is reviewed at quote stage; the revision is confirmed in writing on the order acknowledgement; the drawing standard is confirmed when the files arrive. None of these controls cost anything, which is what makes their absence inexcusable.

How to verify a swiss machining supplier

These four checks cost nothing and can be run before any commitment.

  • Can they name the registration number? Ours is 91441900MA4UWT6X39. Check it in the National Enterprise Credit Information Publicity System.
  • Do they name machine families and counts? A manufacturer lists models; a reseller recycles stock photos.
  • Are the certificate numbers verifiable? Real ISO/IATF certificates carry numbers you can confirm with the registrar.
  • Can you walk the floor? On-site and video audits are welcome at the Dongguan address.

Where the money is actually decided

Three design decisions drive most of the cost on a machined part: internal corner radii matched to a real cutter diameter, cavity depth kept within about four times the tool diameter, and a general tolerance on every feature that does not mate. Each one changes the tool that can be used, and the tool determines how much material can be removed per minute, which is why these matter more than any process selection.

This should come up when quoting, before any metal is cut, because the changes are usually trivial on the drawing and significant on the machine.

What tolerance is realistic, and what does it cost?

Milling and turning hold ±0.002 mm (turning) / ±0.003 mm (milling); precision grinding and wire EDM hold ±0.002 mm. Those are process capabilities, not defaults — a drawing does not need every dimension at the limit, and specifying tighter than the function requires is the single most common driver of unnecessary cost on a machined part.

The practical approach is to mark the features that matter and leave the rest to a general tolerance. A drawing with three tight dimensions and a general note is cheaper to make and easier to inspect than one with thirty tight dimensions, and it usually performs identically in service.

What is on the floor, by machine family?

Capacity is depth, not a headline machine. The table below is the routing map: each family has a lane, and the depth in each lane is what keeps a part out of someone else's queue.

Machine familyCountRepresentative modelsRole in the schedule
3-axis vertical machining50+ centresBrother SPEEDIO S500Z2N / S700Z2NPrismatic work at the lowest cost per part
4-axis machining20+ centresMazak VCE-430AL / VCE-570CLIndexed multi-face parts without re-fixturing
5-axis machining20+ centresMazak VARIAXIS i seriesSingle-setup complex geometry
5-axis mill-turn—Mazak INTEGREX i-H seriesTurned and milled features in one clamping
CNC turning / mill-turn25+ lathesMazak QT-COMPACT 200MSY LRound parts, live tooling
Swiss-type turning—Citizen Cincom A20 / Star SR-32JII / Tsugami B0205Long, slender parts at high L/D ratios
Precision grinding7+ grinders—Final tolerance on bearing seats and roundness-critical faces
Wire EDM—SodickSharp internal corners and hardened material

What to read out of this list: a part does not wait behind a single machine. Depth in the same family is what lets work move to another lane rather than sit in a queue, and it is what makes a prototype ramp to production on the same floor.

What is the certification position?

ISO 9001:2015, IATF 16949:2016 (excluding clause 8.3 product design), and ISO 14001:2015 — each with a certificate number verifiable with the registrar.

Where the money actually goes

A Swiss machining quote is built from four lines: material, setup, cycle time and inspection. Material is the raw stock - the grade and the size decide it. Setup is the one-time cost of fixturing and programming, which spreads thin over volume. Cycle time is the machine hours, set by how fast the material can be cut and how many operations the part needs. Inspection is the CMM time and the report, which grows with the number of tight tolerances. If you understand those four lines, you can read a quote and see where the cost sits, instead of treating the total as a mystery.

The three things that change the price without changing the part

First, the material - titanium and Inconel run many times slower than aluminium and brass. Second, the tolerance - a ±0.003 mm band costs more than ±0.01 mm because it needs a finishing pass and CMM verification. Third, the quantity - one piece pays the full setup, a thousand pieces spread it to nearly nothing. If a quote looks high, the fastest way to lower it is usually to loosen a tolerance that does not matter, or to order a batch rather than one-offs. Send the drawing to Felipe Iglesias at [email protected] or +86 13126536955 and ask where the cost sits - a straight answer is the fastest way to a cheaper part.

What the floor can actually prove

Behind the numbers is a floor you can walk. Dongguan Zhuohang Ltd runs 100+ CNC machines - the Mazak VARIAXIS I-600 five-axis, the INTEGREX I-250H S mill-turn, Brother SPEEDIO, and TSUGAMI, STAR and CITIZEN Swiss lathes - across 6,800 m² in Hengli Town, Dongguan. Every critical feature is checked on a Hexagon CMM under the 10:1 gauge rule, and the certificate numbers for ISO 9001:2015, IATF 16949:2016 and ISO 14001:2015 are published and verifiable. Capability is tracked with Ppk 1.67 or better at the initial study and Cpk 1.33 or better in production, which is the difference between a tolerance that is quoted and a tolerance that is held.

The same floor serves buyers worldwide - Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa - with shipping from Dongguan. MOQ is 1 piece and lead times run roughly 3 / 7 / 30 days depending on material and documentation. Send the drawing and the quantity to Felipe Iglesias at [email protected] or +86 13126536955, and the quote comes back with the process behind it.

What this shop actually runs

Ask for capability evidence and the answer should be specific. The facility behind this guide runs 100+ CNC machines on a 6,800 m2 floor in Dongguan, China, with 100+ staff. The machine list, by category:

  • 5-axis machining centres (10+) - Mazak VARIAXIS I-600 (510/910/510 mm travel, 12,000 rpm, 22 kW, 71.6 N·m, 30-tool BT40) and Mazak INTEGREX I-250H S (B-axis 0.0001°, 24 kW, 124 N·m, 38-tool HSK-A63). Set up for compound-angle parts, single-setup multi-face prismatic work, and aerospace fittings where datum transfer loss is unacceptable.
  • 3-axis / 4-axis machining centres (50+) - Brother SPEEDIO S500Z2N / S700Z2N (10,000 rpm, 14/21-tool ATC, 0.7 s tool-to-tool, Z-axis 2.2 G) and Mazak VCE-430A L / VCE-570C L (10,000 rpm, 118 N·m, 24-tool ATC). Set up for prismatic parts, plates, brackets, housings.
  • Swiss-type turning centres (10+) - Citizen Cincom A20-3F7 (Φ20 mm, 10,000 rpm), TSUGAMI B0206-III / B0205-III (Φ20 mm, 0.1 µm), STAR SR-32JII / SR-32J Type N (Φ32 mm, 8,000 rpm). Set up for long, slender rotational parts at ±0.002 mm.
  • CNC turning centres (20+) - HEADMAN T70M/1250 (720 mm swing, 117 mm bore, 3,000 rpm, BMT75 12-station turret). Set up for shafts, bushings, flanges up to ±0.002 mm.
  • Wire EDM (5+) - Sodick AQ535L (550/350/300 mm travel, ±20° taper, 800 kg workpiece). Set up for hardened tool steel, internal splines, sharp internal corners that milling cannot reach.
  • Inspection: Hexagon CMM + 20+ gauges - Hexagon CMM for coordinate measurement, plus vision system, profilometer, hardness tester, coating thickness gauge, XRF for material verification. The 10:1 rule (gauge 10x more accurate than the band) is applied to every feature.
  • Machine highlights - VARIAXIS I-600: one-setup multi-face 5-axis + MAZA-CHECK auto-calibration; INTEGREX I-250H S: DONE-IN-ONE mill-turn, B-axis 0.0001° + Ai thermal shield; SPEEDIO S500Z2N / S700Z2N: Z-axis 2.2 G + 0.7 s ATC; Swiss-type: guide-bush switchable + 0.1 µm resolution.

Tolerances held: milling ±0.003 mm, turning ±0.002 mm, grinding and wire EDM ±0.002 mm. Capability: Ppk >= 1.67 initial and Cpk >= 1.33 in production on key characteristics.

Certifications: ISO 9001:2015 (116024/A/0001/UK/En), IATF 16949:2016 (131941/A/0001/SM/En, clause 8.3 design excluded, disclosed openly) and ISO 14001:2015 (116024/B/0001/UK/En), issued to Dongguan Zhuohang Ltd, USCC 91441900MA4UWT6X39, established 2005.

Service area: Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa — built in China, shipped worldwide.

Contact: Felipe Iglesias, [email protected], +86 13126536955.

Ask the four questions before you commit

Registration number, machine depth, certificate numbers, and a walk of the floor. Contact Felipe Iglesias at [email protected] or +86 13126536955. on-site and video audits are welcome.

Frequently Asked Questions

Do you sign NDAs before reviewing drawings?

Yes — an NDA can be signed before any files change hands, and drawings stay inside the quoting system rather than circulating by email.

What is the difference between swiss machining and similar process?

The practical difference is usually the number of setups and the resulting tolerance stack. Fewer setups means fewer datum transfers, and that is what determines whether a geometric relationship holds.

How long does swiss machining take?

Lead time is driven less by cutting time than by queue position, fixture design, and inspection. A part that needs a purpose-built fixture has a longer first-article lead and a much shorter repeat lead, which is worth asking about separately.

What is the difference between a prototype build and a production build here?

Usually only quantity and scheduling. Both run on the same machines and the same process, which is what makes a later ramp a scheduling change rather than a re-qualification.

What tolerances can you hold?

In short, ±0.003 mm on CNC milling, ±0.002 mm on CNC turning, and ±0.002 mm where precision grinding or wire EDM is used. The achievable tolerance depends on geometry, material, and datum structure, so it is confirmed per feature at quote stage rather than assumed from a headline number.

Which markets do you export to?

In short, Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa. Our service area also spans Europe, the Americas, Asia, Oceania and Africa — based in China, we serve customers worldwide.

What happens if the first article does not conform?

In short, The nonconformance is documented and the corrective action is agreed before any further parts are made. Whether the replacement cost sits with the plant or the customer depends on where the deviation came from, which is why the revision and the drawing standard are confirmed in writing at the start.

Standards referenced on this page

  • ASTM A582/A582M-12 — Standard Specification for Free-Machining Stainless Steel Bars
  • ASTM B348/B348M-21 — Standard Specification for Titanium and Titanium Alloy Bars and Billets
  • ISO 9001 — Quality management systems — Requirements