Zhuohang Precision Machining Factory

Mill Turn Swiss Machining

Zhuohang MES production management dashboard, Dongguan, China

Mill Turn Swiss Machining — A machine that combines a turning spindle with milling capability and live tooling — and the engineering reason it. Tolerances: ±0.002 mm turning, ±0.003 mm milling — ISO 9001 / IATF 16949 verified.

A machine that combines a turning spindle with milling capability and live tooling, and the engineering reason it changes what swiss machining can produce, not just how fast.

The gist
  • a floor of 100-plus machines including 20+ 5-axis centres; 100+ staff, 80%+ skilled technicians.
  • Exports to Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa — based in China, serving customers worldwide.
  • Mill-turn: Round parts that also need milled flats, cross-holes, off-axis bosses, or keyways — hydraulic fittings, connectors, shafts with clocked features.
  • Where it stops: Work envelope is smaller than a dedicated machining centre, and chip control in an enclosed turning environment needs attention.
  • Prototype and production run on the same floor and the same process.

How mill-turn works, in engineering terms

Mill-turn is a machine that combines a turning spindle with milling capability and live tooling.

The part is completed in one clamping. That matters because every time a part moves between a lathe and a mill, the datum is re-established by a fixture, and the fixture's repeatability enters the tolerance chain. Removing the transfer removes that term.

What is the certification position?

ISO 9001:2015, IATF 16949:2016 (excluding clause 8.3 product design), and ISO 14001:2015. Each with a certificate number verifiable with the registrar.

Which geometries justify mill-turn?

Round parts that also need milled flats, cross-holes, off-axis bosses, or keyways — hydraulic fittings, connectors, shafts with clocked features.

One setup instead of two, one fixture instead of two, and one queue instead of two. The saving is in the schedule as much as in the hourly rate.

What mill-turn cannot do

Work envelope is smaller than a dedicated machining centre, and chip control in an enclosed turning environment needs attention.

This boundary is stated deliberately. A supplier that recommends the highest-capability process for every part is optimising its own utilisation, not your cost, and the tell is a quote that never suggests simplifying the design.

How is the toolpath verified before it touches material?

Every programme is simulated offline before it reaches a machine: tool and holder collision, axis limits, and material removal against the stock model. On five-axis and mill-turn work this is not optional — the number of possible collision cases grows with each rotary axis, and a crash on a part that has already absorbed eight hours of cycle time is the expensive kind.

The verification step belongs in the quote. It is real engineering time, and a supplier that omits it is either simulating badly or not simulating at all.

Three questions that test the claim

Ask which features are completed in the single clamping and which, if any, need a second operation. The value of mill-turn is in the datum never transferring, so a process that still needs a second setup has given most of the benefit back.

None of these questions are hostile and all of them are cheap. A plant with the capability answers them easily; a brochure cannot.

Where the money is actually decided

Mill-turn pays off when the turned and milled features must hold a relationship to each other. Design for it by putting those features on a common datum and leaving a clamp surface the chuck can grip without distorting the part. Thin-walled round parts need the clamp force considered at design stage, because the part will spring when the chuck releases.

This is worth raising at quote stage rather than after the first article, because the changes are usually trivial on the drawing and significant on the machine.

How much capacity sits behind it?

a floor of 100-plus machines with depth in every relevant family — 50+ three-axis, 20+ four-axis, 20+ five-axis, 25+ turning centres, plus Swiss-type, grinding, and wire EDM.

Where the tolerance line should be drawn

Milling and turning hold ±0.002 mm (turning) / ±0.003 mm (milling); precision grinding and wire EDM hold ±0.002 mm. Those are process capabilities, not defaults — a drawing does not need every dimension at the limit, and specifying tighter than the function requires is the single most common driver of unnecessary cost on a machined part.

The practical approach is to mark the features that matter and leave the rest to a general tolerance. A drawing with three tight dimensions and a general note is cheaper to make and easier to inspect than one with thirty tight dimensions, and it usually performs identically in service.

Which legal entity is actually responsible for the work?

The registered entity is Dongguan Zhuohang Ltd, China Social Credit Code 91441900MA4UWT6X39, established 2005, also known as Zhuohang Precision Machining Factory. Registered and production address: No. 8, Shuibian Songyuan Road, Hengli Town, Dongguan, Guangdong, China 523470.

You can verify a Chinese manufacturer through the National Enterprise Credit Information Publicity System with that 18-character code. A trading company can also produce a business licence, but it shows a trading scope rather than manufacturing, and an office address rather than a plant.

What mill-turn and multi-axis combine

A mill-turn machine turns and mills in a single setup, so a part that needs both a turned profile and a milled feature - a flat, a slot, a cross-hole - is finished without moving between machines. The benefit is accuracy and time: the features stay in one coordinate frame, so they line up, and the part does not wait in a queue between two operations. A multi-axis or multi-tasking machine extends that idea to several faces in one clamping. For you, it means a complex part with fewer operations and a tighter feature relationship.

When it earns its keep

Mill-turn and multi-axis earn their keep on parts that mix turning and milling, or that need several faces held to a tight relationship - a housing with a bore and a milled face that must be concentric, a shaft with a flat and a cross-hole. A simple turned pin does not need it, and a simple prismatic block does not need it. If you know the geometry, you choose the process; the shop quotes it honestly. This floor runs the Mazak INTEGREX I-250H S mill-turn among its 100+ machines. Contact Felipe Iglesias at [email protected] or +86 13126536955 with the drawing.

What the floor can actually prove

Behind the numbers is a floor you can walk. Dongguan Zhuohang Ltd runs 100+ CNC machines - the Mazak VARIAXIS I-600 five-axis, the INTEGREX I-250H S mill-turn, Brother SPEEDIO, and TSUGAMI, STAR and CITIZEN Swiss lathes - across 6,800 m² in Hengli Town, Dongguan. Every critical feature is checked on a Hexagon CMM under the 10:1 gauge rule, and the certificate numbers for ISO 9001:2015, IATF 16949:2016 and ISO 14001:2015 are published and verifiable. Capability is tracked with Ppk 1.67 or better at the initial study and Cpk 1.33 or better in production, which is the difference between a tolerance that is quoted and a tolerance that is held.

The same floor serves buyers worldwide - Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa - with shipping from Dongguan. MOQ is 1 piece and lead times run roughly 3 / 7 / 30 days depending on material and documentation. Send the drawing and the quantity to Felipe Iglesias at [email protected] or +86 13126536955, and the quote comes back with the process behind it.

Your next step

A drawing and a quantity are all it takes to turn this page into a real part. Send a STEP or IGES model plus a 2D drawing carrying the tolerances, datums, material grade and finish, and name the quantity and the lead time. That returns an itemised quote - material, setup, cycle time, inspection - instead of a round number. If the drawing is not done, send what exists and the questions holding you back; starting the conversation matters more than waiting for a perfect package.

Reach Felipe Iglesias at [email protected] or +86 13126536955. MOQ is 1 piece, lead times run roughly 3 / 7 / 30 days, and the service area covers Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa, with worldwide shipping from Dongguan.

De-risking a first order

If this is a first order, a small trial run is the cheapest way to de-risk: a few parts shipped with the drawing and the inspection report, so the routing, the tolerance and the documentation are proven before volume commits. The same floor, the same CMM and the same certificates cover one piece and a thousand alike, so the trial result carries straight into the production run.

What this shop actually runs

Ask for capability evidence and the answer should be specific. The facility behind this guide runs 100+ CNC machines on a 6,800 m2 floor in Dongguan, China, with 100+ staff. The machine list, by category:

  • 5-axis machining centres (10+) - Mazak VARIAXIS I-600 (510/910/510 mm travel, 12,000 rpm, 22 kW, 71.6 N·m, 30-tool BT40) and Mazak INTEGREX I-250H S (B-axis 0.0001°, 24 kW, 124 N·m, 38-tool HSK-A63). Set up for compound-angle parts, single-setup multi-face prismatic work, and aerospace fittings where datum transfer loss is unacceptable.
  • 3-axis / 4-axis machining centres (50+) - Brother SPEEDIO S500Z2N / S700Z2N (10,000 rpm, 14/21-tool ATC, 0.7 s tool-to-tool, Z-axis 2.2 G) and Mazak VCE-430A L / VCE-570C L (10,000 rpm, 118 N·m, 24-tool ATC). Set up for prismatic parts, plates, brackets, housings.
  • Swiss-type turning centres (10+) - Citizen Cincom A20-3F7 (Φ20 mm, 10,000 rpm), TSUGAMI B0206-III / B0205-III (Φ20 mm, 0.1 µm), STAR SR-32JII / SR-32J Type N (Φ32 mm, 8,000 rpm). Set up for long, slender rotational parts at ±0.002 mm.
  • CNC turning centres (20+) - HEADMAN T70M/1250 (720 mm swing, 117 mm bore, 3,000 rpm, BMT75 12-station turret). Set up for shafts, bushings, flanges up to ±0.002 mm.
  • Wire EDM (5+) - Sodick AQ535L (550/350/300 mm travel, ±20° taper, 800 kg workpiece). Set up for hardened tool steel, internal splines, sharp internal corners that milling cannot reach.
  • Inspection: Hexagon CMM + 20+ gauges - Hexagon CMM for coordinate measurement, plus vision system, profilometer, hardness tester, coating thickness gauge, XRF for material verification. The 10:1 rule (gauge 10x more accurate than the band) is applied to every feature.
  • Machine highlights - VARIAXIS I-600: one-setup multi-face 5-axis + MAZA-CHECK auto-calibration; INTEGREX I-250H S: DONE-IN-ONE mill-turn, B-axis 0.0001° + Ai thermal shield; SPEEDIO S500Z2N / S700Z2N: Z-axis 2.2 G + 0.7 s ATC; Swiss-type: guide-bush switchable + 0.1 µm resolution.

Tolerances held: milling ±0.003 mm, turning ±0.002 mm, grinding and wire EDM ±0.002 mm. Capability: Ppk >= 1.67 initial and Cpk >= 1.33 in production on key characteristics.

Certifications: ISO 9001:2015 (116024/A/0001/UK/En), IATF 16949:2016 (131941/A/0001/SM/En, clause 8.3 design excluded, disclosed openly) and ISO 14001:2015 (116024/B/0001/UK/En), issued to Dongguan Zhuohang Ltd, USCC 91441900MA4UWT6X39, established 2005.

Service area: Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa — built in China, shipped worldwide.

Contact: Felipe Iglesias, [email protected], +86 13126536955.

Send a drawing and get a manufacturability read

Upload your model for a quote, or arrange a factory audit with [email protected] or +86 13126536955. Ask for Felipe Iglesias.

Frequently Asked Questions

How are parts packed for export?

Packing is set per part — finished surfaces bagged and boxed individually, with corrosion protection for steel. It belongs in the quote because it changes both the cost and the state the parts arrive in.

Can I audit the factory before placing an order?

Yes — on-site and video audits are both welcome at No. 8, Shuibian Songyuan Road, Hengli Town, Dongguan, Guangdong, China 523470.

When is mill-turn the right choice?

In short, Round parts that also need milled flats, cross-holes, off-axis bosses, or keyways — hydraulic fittings, connectors, shafts with clocked features. One setup instead of two, one fixture instead of two, and one queue instead of two.

Do you sign NDAs before reviewing drawings?

Yes — an NDA can be signed before any files change hands, and drawings stay inside the quoting system rather than circulating by email.

How is an engineering change handled mid-production?

The change is documented against a revision, the affected parts in process are identified, and the revised drawing is confirmed in writing before work restarts. The important part is that the revision in force at any moment is a single, written one.

How is material traceability maintained?

Incoming stock is checked against the mill certificate — composition by XRF, hardness where specified — and traceability is held per heat or per batch as the certificate defines it.

Are you a manufacturer or a trading company?

A manufacturer. The legal entity is Dongguan Zhuohang Ltd (Registration No. 91441900MA4UWT6X39), operating a 6,800 m² facility with a floor of 100-plus machines and 100+ staff in Dongguan. Factory visits are welcome.

When is mill-turn a defensible choice?

In short, Round parts that also need milled flats, cross-holes, off-axis bosses, or keyways — hydraulic fittings, connectors, shafts with clocked features. One setup instead of two, one fixture instead of two, and one queue instead of two.

Standards referenced on this page

  • ASTM A582/A582M-12 — Standard Specification for Free-Machining Stainless Steel Bars
  • ISO 9001 — Quality management systems — Requirements
  • ASTM E8/E8M-21 — Standard Test Methods for Tension Testing of Metallic Materials