- more than 100 machines including 20+ 5-axis centres; 100+ staff, 80%+ skilled technicians.
- Exports to Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa — based in China, serving customers worldwide.
- Wrought stock versus build-dependent microstructure — the first dividing line.
- On this page the focus is tolerance: where the two processes actually separate.
- The two cost curves cross; the crossover quantity is the real question.
What happens at the tolerance line?
Tolerance is where the two processes separate most sharply. Machining holds ±0.002 mm (turning) / ±0.003 mm (milling) as a routine; additive processes hold a looser band and, critically, need machining on the interfaces regardless. If a part has a bearing seat, a sealing face, or a threaded hole, that feature is going to be machined whether the rest of the part is printed or not.
That is the part of the comparison most often missed: a printed part with machined interfaces carries both processes, both setups, and both costs. Where the interfaces are simple, printing the whole part and machining three features can still win on geometry; where they are numerous, the balance tips quickly.
Surface finish behaves the same way. An as-printed surface is usually rougher than an as-machined one, and the layer structure means finishing is not simply cosmetic — it affects fatigue behaviour on a loaded part.
Which certifications apply, and what do they exclude?
Three certificates, each with a number you can check with the registrar:
| Standard | Certificate number | Scope note |
|---|---|---|
| ISO 9001:2015 | 116024/A/0001/UK/En | Quality management system |
| IATF 16949:2016 | 131941/A/0001/SM/En | Automotive QMS. Excludes clause 8.3 product design |
| ISO 14001:2015 | 116024/B/0001/UK/En | Environmental management system |
The IATF 16949 certificate excludes clause 8.3 (product design). That is normal for a build-to-print manufacturer and it is stated here rather than left for an auditor to discover: the shop builds to the design you supply, it does not originate the design.
The certification difference
Material properties are the first dividing line. A machined part is made from wrought stock, so its mechanical properties are the properties of the mill product — known, consistent, and certifiable to a standard, with a certificate traceable to the heat or batch. An additively manufactured part carries the microstructure of its build, which is often anisotropic and usually needs post-processing before it can be trusted in a load path.
For a part that has to be certified, that difference is decisive. Aerospace and medical work generally requires material properties that can be traced to a mill certificate, and printed parts in those sectors carry a heavier qualification burden for exactly that reason.
Where the part is not load-bearing — a jig, a fixture, a form-and-fit prototype. The certification argument falls away and the geometry argument takes over.
What does the cost curve look like?

Machining carries a fixed cost — programming, fixturing, first-article inspection — and a low variable cost per part. Additive carries almost no fixed cost and a high, roughly flat cost per part. The two lines cross somewhere, and the crossing point is what determines the right process.
Below the crossover, printing is cheaper. Above it, machining is. The crossover quantity is not a constant, it moves with part size, material, and tolerance, which is why the useful question is not "which is cheaper" but "at what quantity does this part cross over".
| Factor | Swiss Machining | Additive manufacturing |
|---|---|---|
| Material properties | Wrought stock, certifiable to standard | Build-dependent, often anisotropic |
| Typical tolerance±0.002 mm (turning) / ±0.003 mm (milling) | Looser; interfaces usually machined | |
| Fixed cost | Programming, fixturing, FAIR | Near zero |
| Variable cost per part | Low and falling with volume | High and roughly flat |
| Geometry freedom | Limited by tool access | Internal channels and lattices possible |
| Lead time at qty 1 | Fixture and programme dependent | Often shorter |
| Best quantity band | Prototype through production | One-offs and geometry validation |
The practical test: if the part has a datum structure that has to hold a geometric relationship, machining is usually the answer. If the part's value is in a shape no cutter can reach, printing is.
Can the two be combined?
Yes, and it is often the right answer for a complex, low-volume, tight-interface part: print the near-net shape, then machine the datums, sealing faces, and threaded features. The print buys geometry the cutter cannot reach; the machining buys the tolerance the print cannot hold.
The cost of that route is two processes and a handover between them, so it earns its keep only where the geometry genuinely cannot be cut. Where it can be cut, cutting it is simpler and cheaper.
What design decisions move the cost on swiss machining?
Three design decisions drive most of the cost on a machined part: internal corner radii matched to a real cutter diameter, cavity depth kept within about four times the tool diameter, and a general tolerance on every feature that does not mate. Each one changes the tool that can be used, and the tool determines how much material can be removed per minute. Which is why these matter more than any process selection.
This should come up when quoting, before any metal is cut, because the changes are usually trivial on the drawing and significant on the machine.
How much capacity sits behind it?
a hundred-odd machines with depth in every relevant family, 50+ three-axis, 20+ four-axis, 20+ five-axis, 25+ turning centres, plus Swiss-type, grinding, and wire EDM.
What tolerance applies?
±0.003 mm on CNC milling, ±0.002 mm on CNC turning; ±0.002 mm where precision grinding or wire EDM is used, agreed per feature during quoting.
Which legal entity is actually responsible for the work?
The registered entity is Dongguan Zhuohang Ltd, China Social Credit Code 91441900MA4UWT6X39, established 2005, also known as Zhuohang Precision Machining Factory. Registered and production address: No. 8, Shuibian Songyuan Road, Hengli Town, Dongguan, Guangdong, China 523470.
You can verify a Chinese manufacturer through the National Enterprise Credit Information Publicity System with that 18-character code. A trading company can also produce a business licence, but it shows a trading scope rather than manufacturing, and an office address rather than a plant.
What this shop actually runs
Ask for capability evidence and the answer should be specific. The facility behind this guide runs 100+ CNC machines on a 6,800 m2 floor in Dongguan, China, with 100+ staff. The machine list, by category:
- 5-axis machining centres (10+) - Mazak VARIAXIS I-600 (510/910/510 mm travel, 12,000 rpm, 22 kW, 71.6 N·m, 30-tool BT40) and Mazak INTEGREX I-250H S (B-axis 0.0001°, 24 kW, 124 N·m, 38-tool HSK-A63). Set up for compound-angle parts, single-setup multi-face prismatic work, and aerospace fittings where datum transfer loss is unacceptable.
- 3-axis / 4-axis machining centres (50+) - Brother SPEEDIO S500Z2N / S700Z2N (10,000 rpm, 14/21-tool ATC, 0.7 s tool-to-tool, Z-axis 2.2 G) and Mazak VCE-430A L / VCE-570C L (10,000 rpm, 118 N·m, 24-tool ATC). Set up for prismatic parts, plates, brackets, housings.
- Swiss-type turning centres (10+) - Citizen Cincom A20-3F7 (Φ20 mm, 10,000 rpm), TSUGAMI B0206-III / B0205-III (Φ20 mm, 0.1 µm), STAR SR-32JII / SR-32J Type N (Φ32 mm, 8,000 rpm). Set up for long, slender rotational parts at ±0.002 mm.
- CNC turning centres (20+) - HEADMAN T70M/1250 (720 mm swing, 117 mm bore, 3,000 rpm, BMT75 12-station turret). Set up for shafts, bushings, flanges up to ±0.002 mm.
- Wire EDM (5+) - Sodick AQ535L (550/350/300 mm travel, ±20° taper, 800 kg workpiece). Set up for hardened tool steel, internal splines, sharp internal corners that milling cannot reach.
- Inspection: Hexagon CMM + 20+ gauges - Hexagon CMM for coordinate measurement, plus vision system, profilometer, hardness tester, coating thickness gauge, XRF for material verification. The 10:1 rule (gauge 10x more accurate than the band) is applied to every feature.
- Machine highlights - VARIAXIS I-600: one-setup multi-face 5-axis + MAZA-CHECK auto-calibration; INTEGREX I-250H S: DONE-IN-ONE mill-turn, B-axis 0.0001° + Ai thermal shield; SPEEDIO S500Z2N / S700Z2N: Z-axis 2.2 G + 0.7 s ATC; Swiss-type: guide-bush switchable + 0.1 µm resolution.
Tolerances held: milling ±0.003 mm, turning ±0.002 mm, grinding and wire EDM ±0.002 mm. Capability: Ppk >= 1.67 initial and Cpk >= 1.33 in production on key characteristics.
Certifications: ISO 9001:2015 (116024/A/0001/UK/En), IATF 16949:2016 (131941/A/0001/SM/En, clause 8.3 design excluded, disclosed openly) and ISO 14001:2015 (116024/B/0001/UK/En), issued to Dongguan Zhuohang Ltd, USCC 91441900MA4UWT6X39, established 2005.
Service area: Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa — built in China, shipped worldwide.
Contact: Felipe Iglesias, [email protected], +86 13126536955.
Not sure this is the right process?
Send the model and the drawing and get a straight answer on whether this route is the right one, including where a design change would cut cost. Reach Felipe Iglesias at [email protected] or +86 13126536955.
Frequently Asked Questions
Is inspection documentation included in the quote?
It should be stated explicitly. A first-article report is a document someone has to produce, and whether it is a full dimensional report or a sample plan changes both the cost and what you receive.
How are parts packed for export?
Packing is set per part — finished surfaces bagged and boxed individually, with corrosion protection for steel. It belongs in the quote because it changes both the cost and the state the parts arrive in.
Is 3D printing cheaper than CNC machining?
At quantity one, sometimes. Above the crossover quantity — which depends on size, material, and tolerance — machining is cheaper, and the gap widens with volume. A printed part that needs its interfaces machined carries both costs.
Can I audit the factory before placing an order?
Yes — on-site and video audits are both welcome at No. 8, Shuibian Songyuan Road, Hengli Town, Dongguan, Guangdong, China 523470.
Which markets do you export to?
In short, Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa. Our service area also spans Europe, the Americas, Asia, Oceania and Africa — based in China, we serve customers worldwide.
What happens if the first article does not conform?
In short, The nonconformance is documented and the corrective action is agreed before any further parts are made. Whether the replacement cost sits with the plant or the customer depends on where the deviation came from, which is why the revision and the drawing standard are confirmed in writing at the start.
What is the difference between a prototype build and a production build here?
Usually only quantity and scheduling. Both run on the same machines and the same process, which is what makes a later ramp a scheduling change rather than a re-qualification.
Continue reading: 3 Axis Swiss Machining · 4 Axis Swiss Machining · 5 Axis Swiss Machining
Standards referenced on this page
- ASTM A582/A582M-12 — Standard Specification for Free-Machining Stainless Steel Bars
- ISO 14001 — Environmental management systems — Requirements with guidance for use
- IATF 16949:2016 — Automotive quality management system standard
